Issue 2/2014 (Special Issue)

THEORETICAL AND METHODOLOGICAL PROBLEMS OF RUSSIAN SYSTEM OF MARKETING FORMATION

Conceptual bases of strategic marketing planning in innovative and investment activity management of the industrial organizations
Russian State Technological University
R.S. Golov,
A.V. Rozhdestvensky,
A.V. Mylnik,
M.B. Pushkareva,
Moscow Institute of state and corporate management
A.P. Agarkov

Abstract: The article is devoted to the problems and challenges of strategic marketing planning within the innovation and investment projects and raises questions structure the marketing strategy, marketing research cycle, the relationship of strategic planning and market research. The authors developed a classification of marketing strategies by market maturity.
Key words: marketing, marketing research, strategic planning, marketing strategy, innovation and investment activities

The future of the department: convergent marketing
Russian State Technological University
N.S. Perekalina,
S.P. Kazakov,
Financial University under the Government of the Russian Federation
I.V. Rozhkov

Abstract: The article deals with convergence as one of the directions of development of the Russian marketing education. The article examines the historical and economic background of convergent marketing. The paper analyzes the essence of convergent marketing ithin the paradigm of rate of use value and its application in the educational process of the Marketing department in MATI.
Key words: marketing, convergence, rate of use-value, convergent marketing.

Mechanizms and instruments of marketing
International Slavic Institute
Smirnoff K.,
Nikitina T.

Abstract: Revealed new policy named as 5 P – policy of possibilities – has been elaborated by the authors. In the article classical 4 policies are anew considered and evaluated as well as it has been shown their insufficiency from the point of view of production due to their market and consumer orientation. Marketing structure is regarded as the total amount of policies being marketing elements. Marketing instruments are represented in the article as a set of operations such as advertisement and advocacy within the framework of the Promotion policy and so on.
Key words: Marketing instruments, marketing structure, policy of possibilities, ensuring of competitiveness, reduction of expenditures, control of material resources optimization of organizational structure of a company.

Convergence and interactivity of the modern information flows as marketing resourses
Saint–PetersburgstateUniversityofcinemaandtelevision
I.V. Maruseva

Abstract: In article are considered the ways and senses of moral movement of business andmarketing to the consumer in today’s media content.
Key words: convergence of mass media, interactive advertising, business, ethics, adaptation to the consumer, culture of the society.

Counteraction against public benefits unpaid consumption in the light of economy modernization
Financial University under the Government of the Russian Federation
O.E. Pyrkina,
A. Yu. Yudanov

Abstract: The curtailment of public goods unpaid consumption (PGUC) is a problem of paramount importance in effective economy creating. The phenomenon of PGUC, well known in the world scientific literature as a “free rider problem”, usially is considered as an unsolvable problem. This paper suggests an idea of specific solution for an important particular case, when economic interests of “free rider” immediate environment are infringed. We consider the mathematical model on the base of Markov chain with a single absorbing state to describe the effect of PGUC local resistance. The convergence to a stable Markov chain final distribution is observed. The system is demonstrated to be self-adjustable throw the force of economic levers, which presents much more effective control system than application of administrative measures of restriction.
Key words: Public goods, free rider problem, actively involved surroundings of free rider, Markov chain, absorbing state, self-adjusting system.

Marketing development of tax relations as a factor of increasing the activity of innovative production
The Vladimir branch of the Financial University under the Government of the Russian Federation
T.A. Iskyanderova,
I.N. Novokupova

Abstract: The article deals with analyses of the results of Russian innovative production, estimates the tax system of innovative activity in Russia and abroad, proposes the necessity of bringing the tax legislation to the requirements of the innovations market and marketing development of tax relations at all stages of the innovation cycle as a factor of increasing the Russian innovative production activity.
Key words: marketing of tax relations, innovations, innovative production activity, innovations commercialization.

The evolution of approaches to the study of customer behaviour in Russia
N.V. Dozortceva

Abstract: The article rates evolution of relationship between sellers and customers in Russia at the close of XX century and at the beginning of XXI century. The study is performed with the help of main marketing conceptions. The main aim of the article is consideration of evolution of approaches to the study of consumer behavior in Russia. The subject of the article is relevant, because Russian marketing is actively developing, and the knowledge of stages, which it has gone during it`s evolution, is the base for efficient doing business in current terms. The subject of the article is new, because in recent years Russian market of customer formed, and that`s why the knowledge of approaches to the study of consumer behavior is important for efficient doing business.
Key words: marketing, marketing conceptions, consumer, seller, study of consumer behavior, USSR, Russia.

Troubles of market segmentation techniques classification
Yaroslavl branch of the Financial University under the Government of the Russian Federation
A.P. Karasyov

Abstract: The paper concerns the trouble of market segmentation techniques classification. The main conclusion of the paper is the absence of unified classification of market segmentation techniques. This situation results the decreasing effectiveness of segmentation techniques usage and abandons all advantages of segmentation ideas. A number of classifications suggested by Russian and foreign scientists have been analyzed and author’s classification has been suggested. The new author’s classification gives an opportunity to point out advantages and disadvantages of each old classification.
Key words: market segmentation, segmentation criterion, segmentation techniques, classification, automatic interactive detection, clustering analysis.

Problems and perspectives of communication in Civil Aviation
Financial University under the Government of the Russian Federation
O.V. Kolesnikova

Abstract: The article includes analyze of problems in small aircraft, how to ensure them navigation equipment, problems of conditions of personnel staff. This article includes considering the funding from the budget of Civil Aviation, borrowing runways and flight personnel retraining, automatic broadcasts organization and operational aeronautical information about navigation aids and airfields with existing communication channels. Communication links between the various users of information.
Key words: Small aircrafts, airport, air routes, airmen, planes, traffic, Global Navigation Satellite System, budgetary financing, content, modernization, development of airdrome infrastructure.

Gain factor in the formation of positioning strategy of companies
Lomonosov Moscow State University
А.М. Chernikov,
О.М. Zavalovich

Abstract: Considered content positioning, revealed its key elements and their relationships, basic positioning function, importance ranking grounded at different stages of the company’s strategy is a sequence of steps in the process of positioning, as well as an approach to its formation in the company in business markets.
Key words: the company’s strategy, positioning, marketing, target audience, business markets.

Making of complex marketing decisions in crisis conditions
Financial University under the Government of the Russian Federation
Ya. V. Chupina

Abstract: This article is devoted to the marketing decision-making problem within the crisis management. This issue is also as essential for the new economy, as poor developed in the Russian and international economic science. The article includes description of arising problems during the process of designing management decisions in crisis and states existing methods and algorithms for integrated management of anti-crisis solutions. The peculiarities of aims of marketing decisions within stable and unstable economic systems are described. The increasing importance of marketing hysteresis effect and the conditions leading to possibility of its existence are observed.
Key words: crisis, marketing decisions, unstable systems, marketing-mix, marketing hysteresis.

INNOVATIVE TECHNOLOGIES OF MARKETING ACTIVITY AND MARKETING OF INNOVATIONS

Innovations in marketing activity of organizations
Financial University under the Government of the Russian Federation
S.V. Karpova

Abstract: Defined stages, justifying the value of unique offers in the benefits of the market and increase profits. It is shown that companies have two basic options when searching for new business areas is sustainable and disruptive innovation.
Key words: unique idea, unique technology, the market for unique offers, disruptive innovations, sustaining innovations.

Marketing technologies as a tool for output new product on market
Financial University under the Government of the Russian Federation
I.M. Sinyaeva

Abstract: This article reveals the content of marketing technology as an essential tool for the commercialization of new products with the release of the purpose and objectives. The paper presented in a logical sequence of the market trends and patterns of innovation, organizational forms of innovation management and maintenance of the innovative project startup. Noteworthy summary of new items commercialization stages of the algorithm, which is presented in the article.
Key words: market, innovation, commercialization, marketing technology, test marketing.

Marketing aspects of commercialization the investment projects in the R&D market
Russian state professional pedagogical University
A.D. Denisov,
V.A. Shaposhnikov,
L.N. Bondareva,
Ural State Mining University
A.V. Namyatov

Abstract: The purpose of research: to identify problem of commercialization the investment projects in modern Russian by the marketing. The novelty of research: we believe that in the process of investment projects pay insufficient attention to pre-stage. We decide that the marketing should be the leading direction on this stage. The article describes the features of commercialization investment projects in industrial countries by the example of R&D market. Presented the interpretation of the basic ways to overcome risks of investing, to consider approaches for minimization the negative consequences from risks.
Key words: Marketing, investment projects, R&D market, managing risk when investing, minimization the negative consequences from risks.

The infl uence of product constituent for economic clusters grocering
JSC “Centre of marketing”
V.V. Motorzhin

Abstract: The article discusses the specific features of developing the innovative economic cluster based on the principles of trade and technology. The term of key competence for technological cluster is introduced, and the technological cluster in terms of service economy is considered.
Key words: technology cluster, innovation, competence center.

The innovative direction in development of industrial marketing
Bryansk state University named after academician I. G. Petrovskii
M.A. Muravyeva,
V.V. Silaeva,
O.G. Nazarova

Abstract: Article is devoted to production and consumption research wood pellets as to one of ways of innovative development of timber processing complex. Wood pellets – real alternative to fossil types of fuel as according to the calorific characteristics don’t concede to them, and their ecological parameters out of competition. Now there is an increase in use of wood waste and low-grade wood in production of thermal energy abroad. Production wood pellets in Russia only starts developing, and market capacity constantly grows. It is necessary to send efforts of the Russian businessmen to the sphere of deep processing of wood waste, to stimulate investors to finance similar projects.
Key words: Innovative development, power policy, wood pellets, investors, ecology, biofuel, bio-energetics, greenhouse effect, competition, demand, export.

Co-branding technologies in the age of innovatoin
The Liberal Arts University (Ekaterinburg)
N.V. Hmelkova

Abstract: Co-branding – new technology of development brands is considered. The author’s view on the role of co-branding in the age of innovation and examples of international co-branding alliances are presented.
Key words: co-branding, strategic marketing alliance, innovation, brand, branding

MARKETING AND LOGISTICS, MODERN PROBLEMS AND DECISIONS

Logistics of outsourcing services – key element of merchantability
Financial University under the Government of the Russian Federation
V.V. Sinyaev

Abstract: The article reveals the specific of structure of outsourcing service market, its performance and the major players. The article highlights the benefits of outsourcing opportunities with respect to the corporate allocation of the basic criteria for selection of outsourcer. The article shows the benefits of outsourcing with an illustration of organizational – methodical model study outsourcing logistics services.
Key words: logistics services, outsourcing, the outsourcer, provider control, principles, model, cross-docking.

The method of solving problems in transport logistics with using the nonlinear transport model
Kemerovo Institute (branch) of the Plekhanov Russian University of Economics
M.A. Anisova,
Ye.I. Kharlampenkov

Abstract: Decrease in expenses for transportation of goods and, as a result, increase of competitiveness of the enterprise, is an actual problem of transport logistics. We consider the problem of drawing up plans of transportations of clients (Nash equilibrium). Transportation tariffs depend linearly on total volumes of transportations of all clients. Electric networks, pipeline systems, railway transport can serve as an application of this model.
Key words: nonlinear transport model; logistics; optimization of transport; tariffs; Nash equilibrium; quadratic programming.

FOREIGN EXPERIENCE

Modern approaches to relationship marketing and CRM-systems
Financial University under the Government of the Russian Federation
I.V. Rozhkov

Interview with Oleg Ivanovich Bochkarev

Сегодня в гостях у журнала «Экономика и управление в машиностроении» заместитель председателя Военно-промышленной комиссии при Правительстве РФ Олег Иванович Бочкарев.

Issue 1/2014

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Refi nancing problems of crisis organization in order of bankruptcy prevention

Mamaeva A.V.
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
e-mail: fenhelann@mail.ru

Abstract: The article concerns some problems which may appear when making and realizing decisions on crisis organization refi nancing in order to restore crisis organization solvency and to stave off bankruptcy proceeding initiation. The problems causes and ways of its eliminations are investigated. The material may be useful to fi nancial managers, enterprises promoters and creditors when making anti-crisis measures.
Keywords: crisis, solvency restoring, insolvency, creditor, refi nancing, debt restructuring

Methods of the economic modernization

Khroni К.О.
MATI — Russian State Technological University
e-mail: spiavia@gmail.com

Abstract: The article contains the study of the theoretical directions of of economic systems modernization. The comparative description of the object and methods of diff erent directions are given.
Keywords: modernization, theoretical directions of modernization, innovations, societ

Features of mission and vision formation in the organizations’ activity

Zvonnikov V.I.,
Nefedov V.A.,
Safonov A.A.
State University of Management
e-mail: nefedov@guu.ru

Abstract: The article is devoted to the features of mission and vision formation of the organizations, activities. The authors examine the diff erent types of missions. The article also touches the issues of leadership and teamwork.
Keywords: mission, vision, leadership, teamwork, organization activity

INNOVATIVE INVESTMENT ACTIVITY

Production business activity and its legal support – the way of innovative economy development

Agarkov A.P.,
Gerenrot B.A.,
Erokhina E.A.
Moscow Institute of state and corporate management
e-mail: migky@rambler.ru

Abstract: The authors explore the state and the opportunities in entrepreneurial manufacturing activity, types and methods of legal council using the undertaking under the cluster approach
Keywords: entrepreneurship, manufacturing, entrepreneurial manufacturing activity, innovation (innovative activity), legal council

State support of small innovation export-oriented enterprises

Shestakov V.A.
Lomonosov Moscow State University
e-mail: shestakov_v@list.ru

Abstract: The article discusses various forms of state support of small innovation export-oriented enterprises, which are used in the world practice. Also examine the current situation in Russia and formulated a number of recommendations to reform and improve the system of small innovation enterprises support.
Keywords: taxes, innovation, small business, export-oriented enterprise, export policy of the state

Conceptual bases of the innovative and investment clustered environments formation in conditions of modernization

Golov R.S.,
Milnik A.V.
MATI — Russian State Technological University
e-mail: roman_golov@rambler.ru

Abstract: The article is devoted to the issues of formation of the innovative and investment clustered environments, representing an eff ective platform for the implementation of the cluster integration between innovation, investment and industrial structures. Also the authors provide the concept, nature and structure of automated process control systems cluster (ACS PC). In the framework of the research the participants’ integration basic principles have developed in a cluster environment, as well as methods of state incentives for integration processes.
Keywords: cluster, a clustered environment, innovation and investment activity, automation, industrialorganization, innovation, investment, self-organization

Basic problems of development of innovative technologies: the role of innovations and technologies in economy

Bogachev D.V.,
Kashirin V.V.
MATI — Russian State Technological University
e-mail: kavava@mail.ru

Abstract: The article considers the technological innovation as an integral part of eff ective economic development, based on high technology effi cient production. And also describes the main problems – the barriers and difficulties that arise during the development and implementation of technological innovation, as well as the defi nition of common problems of doing business in Russia based on production innovations. Also described the current situation in the Russian Federation and evaluated the prospects of solving those problems and further development.
Keywords: innovation, product and process innovation, innovation centers, industrial park, economic modernization, improvement

ENERGY SAVING AND ENERGY EFFICIENCY

Conceptual framework and the energy saving management system structural building at the industrial enterprises

Teplishev V.Yu.
MATI — Russian State Technological University
e-mail: teplishev@tbnenergo.ru

Abstract: The article is devoted to the study of science cognitive functions and ways of innovative ideas occurrence. The author defi nes the three main ways of new ideas formation: on the basis of fantasy usage, as a result of illumination and in a dream. Under article defi nes the role of the scientifi c development of humanity> s information fi eld, as well as major social intellectually-synergetic systems.
Keywords: system, the systemic-functional approach, energy saving management, energy efficiency, structure, subsystem, innovation, functions. innovation

MARKETING, SALES APPROACH

The history of marketing scientifi c school development in MATI

Perekalina N.S.,
Kazakov S.P.,
Rozhkov I.V.
MATI — Russian State Technological University
e-mail: ivr1@yandex.ru

Abstract: The article reveals the origins of the marketing scientifi c school in MATI – RSTU named after K.E. Tsiolkovsky. The article defines the objective economic reasons for the Russian marketing development from the 80s of the last century. The article also lists the main results of the Marketing department in MATI in anticipation of its 20th anniversary. In conclusion, the article indicated the basic direction of the department in the future – the convergence of technological and economic knowledge, based on marketing categories of the rate and mass of use-value.
Keywords: marketing scientifi c school in MATI, convergence, marketing categories, rate of use-value

QUALITY PRODUCTION, COMPETITIVENESS

Modern methods of achieving a competitive advantage in the industry

Kuleshova T.A.
Russian State Social University
e-mail: tanprokhorova@yandex.ru

Abstract: The article describes current approaches to achieve competitive advantage in the construction fi eld. The study is based on the principle of the fi ve competitive forces of M. Porter. The proposed methods are associated with the Internet resources, using Pareto law, internet resources and new technologies.
Keywords: innovation, competition, business processes, competitive advantage, Internet resources, Pareto law

FOREIGN EXPERIENCE

Managerial decision making in modern socialeconomical systems

Pushkareva M.B.
MATI — Russian State Technological University
e-mail: mpushkareva@yandex.ru

Issue 6/2013

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Rozhdestvensky A. V., Golov R. S. — Conceptual bases of military-industrial complex enterprises’ reengineering in context of industry modernization

Abstract: The article is devoted to the modernization of the military-industrial complex based on the reengineering of business processes. The main purpose of the modernization is to improve the socio-economic benefits through the implementation of innovative and investment activity. As a key approach to the reengineering of the authors developed a conceptual model for an integrated center of innovation and investment activities, implemented in the structure of the enterprise.
Key words: innovation, investment, innovation and investment, business process reengineering, the military-industrial complex

Pushkareva M. B. — Holarhy production systems’ architecture features in intellectual industrial production systems

Abstract: Heterogeneity of approaches, methods and requirements to intellectual industrial production systems demands united methodology creation. Usage of holarhy production systems could solve this problem and integrate various management paradigms into a whole, keeping thus advantages and individual traits of each.
Key words: holarhy production system, intellectual industrial production systems, management

Bogatyryov V. D., Yesipova O. V., Morozova S. A., Sitnikova A. Yu. — Project financing method when updating fixed assets of machine-building enterprise

Abstract: Developed the scheme of project financing, adapted for machine-building enterprise for that scheme the technique of calculating rents and dividends is proposed.
Key words: project finance, investor, project, assets, rent, dividends, project organization

Sakharov A. V. — Neural networks application of for business management forecasting

Abstract: The theme of prognosis and planning at a factory with the use of artificial neural networks is elucidated in this article. The theoretical possibility of prognosis is shown, and the example of practical use of this method is given.
Key words: forecasting, technical analysis, neural networks, business management, financial management

Agarkov A. P., Yerokhina E. A. — System and complex decisions in enterprise management

Abstract: Considered managerial decision making in the organization on a systematic basis.
Key words: system, effective managerial decision, comprehensive approach

Rodinova N. P. — Resource management optimization of machine-building enterprise

Abstract: The author of article considers possibilities of resource management optimization of machine-building enterprise and comes to the conclusion that the most effective is outsourcing usage.
Key words: resources, machine-building enterprise, outsourcing

Gorish A. V., Gorish E. A., Kirillov A. B., Makarov Yu. N., Ponomarev S. A. — To a question of enterprises’ joint management of various forms of ownership

Abstract: The structure of the main functions of the unitary branch enterprise collective management three-tier system collective bodies is given. The problem of commercial aspects implementation, which provides work motivation and engineering management efficiency is studied.
Key words: branch research institutes, boards, collective nature of management, organizational and legal property, conversion, mixed organizational and legal structure

Grishina T. G., Feofanov A. N. — Risk as uncertainty in decision-making

Abstract: Considered risk assessment in decision-making and on the stages of the project, as well as methods of risk management.
Key words: criterion, risk, management, methods of analysis

INNOVATIVE INVESTMENT ACTIVITY

Fateev A. E. — Communication environment formation in the state — business system in industry restoration processes of the country

Abstract: The assessment of initial communication base of the social and economic tasks solution is given. The analysis of conditions, methods and means of domestic economy transition period is made. Some prime tactical decisions are provided in the organization of the new communication environment.
Key words: communication environment, social and economic tasks, state, economy

Obukhova I. A. — Efficiency assessment of innovative and investment projects

Abstract: In the following article the author offers a new mechanism for economic efficiency assessment accuracy. This mechanism is the mechanism of calculation of the individualized on time intervals project’s of the discounting rate including risk-free norm, inflationary award, risk award of external and internal environment of the project.
Key words: innovations, investments, efficiency, discounting rate

Volovikov B. P. — Innovative activity management efficiency increasing of the industrial enterprise

Abstract: Article is devoted to the innovative activity efficiency analysis of the industrial enterprise. The analysis of the enterprise innovative portfolio is provided in article, the method of innovative portfolio investment appeal increasing is offered. The organizational plan of innovations selection is submitted.
Key words: innovative portfolio, innovative project efficiency indicators, risks, innovative activity business process

Maslennikova N. P. — Innovative development as factor of organization’s competitiveness preservation

Abstract: The innovation development program should include 5 following innovation blocks: of the efficiency, of the evolution, disruptive, of the integration and social. That allows to forecast and plan the innovation development for the long term perspective and to increase the competitiveness of the organization.
Key words: innovation, organization, development program, competitiveness

Konovalov V. M., Prorokov A. N. — Measures for innovative activity stimulation in the European Union

Abstract: European countries for long time were oriented on conservative policy in the sphere of innovations. However, the success of USA and other countries forced to take measures in such area. The scientific-technical, innovation and educational activities become the priority tasks now for the countries of European Unity.
Key words: innovation, scientific-technical development, state subsidies, capital, small business

MARKETING, SALES APPROACH

Bor V. N. — The structured goal focused indicators system and technique and efficiency and stability monitoring algorithm of small enterprise of services

Abstract: The author of article offered a technique and efficiency and stability monitoring algorithm of small enterprises of the services, providing activity results control of the enterprise and zones of mutually beneficial transactions, allows to expand possibilities of management with efficiency and stability of the enterprise of a services, solving problems of the best satisfaction of clients needs.
Key words: system of indicators, efficiency assessment algorithm, small enterprises, services

QUALITY PRODUCTION, COMPETITIVENESS

Kovkov D. V. — Technique of internal and external factors influence assessment on competitiveness of space-rocket branch at large projects implementation

Abstract: Тhe approaches on creation of a technique to assess the influence of internal and external factors on competitiveness of space-rocket industry while implementing various large projects are developed in the article. This technique has great practical value because it allows receiving quantitative estimates of industry competitiveness. Their comparison in dynamics for a few years as well as comparison with similar indicators of other industries in the state allows making a conclusion about dynamics and efficiency of state measures and various large projects.
Key words: internal and external factors, competitiveness, space-rocket industry, projects

Skhirtladze A. G., Feofanov A. N., Grishina T. G. — Modelling of expenses changing at mechanical engineering products production

Abstract: The paper deals with determining the costs in the manufacture of engineering products in different years they are in production. Shows the factors affecting costs, as well as models of change.
Key words: рroduct, engineering, manufacturing, costs, design, process, equipment

FOREIGN EXPERIENCE

Pushkareva M. B. — Power saving features abroad (the review of foreign journals)

Issue 5/2013

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Polkovsky L.M. — IKIS — the effective instrument of the industrial enterprise management

Abstract: At the present time, large industrial companies move to implement integrated enterprise information systems (IEIS). The most popular software products on the market are the developers of these systems: the corporation “Galaxy” and “1C”. This article was first carried out a comparative analysis of functional IEIS, which enables users to select the priority of them for practical use.
Key words: IEIS, industrial enterprises, the corporation “Galaxy”, “1C”, a comparative analysis of functional IEIS

Gorish A.V., Gorish E.A., Dunaevsky V.P., Kirillov A.B., Makarov Yu.N., Ponomarev S.A. — Organizational structure of division management

Abstract: The main types of machinery plant scientific and technical department corporate management are studied.
Key words: structure of management, collective nature of management

Korshunova Ye.D., Il’ichiova Ye.S. — An enterprise innovative potential management method based on system decomposition of the structure and componentry rating

Abstract: An issue of enterprise innovative potential management is considered. A notion of innovative potential is defined more accurately, its structure is determined. A method of innovative potential management is developed, which is based on system decomposition of innovative potential structure.
Key words: enterprise, innovative potential, management

Yunin I.Yu., Feofanov A.N., Capitanov A.V., Mitrofanov V.G. — Information and analytical control systems of the industrial enterprise

Abstract: One of the most important tasks of the industrial plant scheduling is actual data extraction from the accounting systems using data warehouse. The latter gives an opportunity for constructing reporting forms, multivariate analysis with different level of detailing, graphic representation of information, automatic deviation computation. The above mentioned functions allow using stored in the warehouse information for a better plant management control and business understanding. Analytical reports may be run over in different layout and by many devices: as a WEB-page from computer and mobile equipment, as spreadsheets, as formatted report with strictly settled order.
Key words: analytic control system of production profitability, manufacturing automation

Grishina T.G., Feofanov A.N. — Risk as criterion of a technical system assessment

Abstract: The article on the definition of the characteristics of technical systems. Selected one of the criteria for the evaluation of technical systems — the risk. We consider the nature, identification, risk objects and instruments of influence on risk. The methods of risk analysis.
Key words: technical system, criterion, risk management, methods of analysis

Fedorov V.K., Gvozdarev R.S., Arkhiptsev S.A. — Updating of design documentation as risk factor of emergence of a work in progress

Abstract: The article deals with the urgent problem which is related to the influence of the quantity of documentation corrections as the factor that determinates the occurrence of unfinished production and is very complicated for being regulated in the course of mastery of new production.
Key words: corrections, documentation, unfinished production, motivated and unmotivated errors

Barabash Zh.A., Molchansky A.V. — Methods of productions research for recommendations development about the combined production organization possibility

Abstract: In work three methods of research of productions the mathematical, morphological analysis and neural networks are considered. As parameters for research of production structure parameters of the concept of general quality management (total quality management, TQM) were used.
Key words: productions processes, combined production, neural networks, total quality management

INNOVATIVE INVESTMENT ACTIVITY

Grigoriev S.N., Gribkov A.A., Zakharchenko D.V. — Influence on domestic machine-tool construction of Russia’s occurrence in the World Trade Organization

Abstract: In the following article the key factors defining influence of Russia’s occurrence in the WTO on domestic machine-tool construction are considered. The carried-out analysis showed the limited scale of influence on short-term prospect and possibility of substantial negative effects on medium-term and long-term prospect. In article the main problems arising in machine-tool construction in connection with Russia’s accession to the World Trade Organization are defined, and offers on machine-tool construction development in modern conditions are formulated.
Key words: machine-tool construction, World Trade Organization, competitiveness, assessment

Nefedov V.A., Lazukina A.O. — New model of innovative activity of the clothing industry enterprises

Abstract: This article describes the current state of innovation in the form of garment manufacturing coupled model, provides the features and conditions of developing the industry. The work proposes a new Integration model of innovation, where introduced notions of commercial agent — retailer and made integration with the environment in the form of consumer goods and raw materials suppliers.
Key words: innovation, innovation activity, garment manufacturing, textile industry, coupled model, integrated model, dealer, retailer, vendor selection, material support, raw materials suppliers

Zvonnikov V.I., Nefedov V.A., Safonov A.A. — Innovations in modeling of the organizations’ management systems

Abstract: The approaches of modern models, strategy of development models excellence quality of management company are given.
Key words: models, quality management, innovations, competitiveness

Tochilin O.V. — Calculation features of innovative investment projects efficiency on developing aircraft complexes

Abstract: One of the most urgent and important issues in innovative investment projecting of aircraft complexes, i.e. risks management is considered.
Key words: innovative investment project, uncertainty and risk, aircraft complex

MARKETING, SALES APPROACH

Tokhirov T.I. — Current planning of road freight transport

Abstract: In article routine planning of freight automobile transportation at the motor transportation enterprise is considered.
Key words: plan freight, production program, plan for the operation, maintenance and repair of rolling stock

QUALITY PRODUCTION, COMPETITIVENESS

Karasev K.S., Feofanov A.N. — Strategy of company’s working quality indicators determination and implementation

Abstract: Company’s working quality indicators determination and implementation is a very complicated part of firm’s development. Such a serious activity requires a serious strategic plan. In this article you can find the main points of such plan development and implementation. There is also described the main faults which can be made during the determination of the needed quantity and quality of indicators.
Key words: company’s working quality, firm’s development, indicators

Feofanov A.N., Belalov I.R. — Virtual enterprise creation on the basis of PLM-systems

Abstract: Necessary mechanisms and structure of the virtual enterprise (design) creation.
Key words: PDM, PLM, CALS, virtual enterprise

Zmiyevsky V.I. — Quality management systems’ assessment (QMS) of machining production

Abstract: Current requirements for the quality management systems certification of machining processes are covered, and suggestions on controlling the requirements by the executive bodies of quality management systems certification in their activities are given.
Key words: metal cutting, quality, conformance evaluation

EDUCATION, PROFESSIONAL TRAINING

Romanovich V.K., Teplishev V.Yu. — Conceptual approaches to the educational policy new vector formation in the field of service

Abstract: Authors the following paper note that exactly in the educational sphere at the present stage exists possibility of the country sustained economic growth ensuring. The special attention is paid to a problem of experts’ absence in the field of power service.
Key words: power service, educational policy, competitiveness, professional education

FOREIGN EXPERIENCE

Pushkareva M.B. — Energy management features abroad (the review of foreign journals)

Issue 4/2013

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Rozinov A.Y., Shatilov V.A., Logunov V.V. — Technical and economic efficiency of assembly and welding assembly connections by unproductive labor costs reduction

Abstract: A technical and economic efficiency calculation of unproductive labour expenditures reduction at the assembly process of erection joints of thing-sheet ship hull constructions is carried out.
Key words: assembly, welding, erection joints, labour expenditures, economic efficiency

Hayrullin A.N. — Features of the conglomerate integrated structures activity in Russia

Abstract: The questions of conglomerate holdings emergence and development in Russia and specific aspects of this integration type of the enterprises and management problems are considered.
Key words: conglomerate, holdings, integrated structures, management problems

Krasnopevtseva I.V. — Information technologies as a labor productivity growth factor at the industrial enterprises

Abstract: Necessity or information of industrial production with a view or increase of its efficiency is proved. The analysis of influence of information security of the enterprises on a labour productivity level is load. The basic problems, interfering universal introduction in manufacture of information technologies are revealed influence of the human factor on efficiency of use of information resources is noted.
Key words: industrial production, the enterprises of mechanical engineering, information resources, labour productivity, information potential of the staff

Mitrofanov V.G., Feofanov A.N., Capitanov A.V. — Main efficiency indicators of production systems

Abstract: The basic characteristics of the internal efficiency of production systems that are general and do not depend on the specific application of the system.
Key words: efficiency, production systems, quality

Agarkov A.P., Golikov A.M. — Formation and development of infrastructure and preproduction systems in mechanical engineering

Abstract: On the example of the machine-building enterprises working in modern market managing conditions, the question of preproduction systems formation and development management and its infrastructure in mechanical engineering is considered.
Key words: preproduction, mechanical engineering, infrastructure, organizational and economic systems

Kuzmichev A.I., Tshiptsova A.V. — Functional structure of power monitoring at the enterprise

Abstract: A low-cost-based functional structure of energy monitoring at machine-building enterprises is suggested. Active participation of the enterprise personnel is expected under the structure, as well as wide application of the information analysis systems.
Key words: energy monitoring, decomposition, energy-saving management, energy-saving programme, energy efficiency control information analysis systems, energy efficiency strategic guidelines, long-term supply-demand balance

Sigov A.S., Yushkov A.E., Yushkov E.S. — Creation of effective system of fastening and the rights to results transfer of scientific-technical activity in the framework of a public-private partnership

Abstract: It is suggested the system of distribution of rights to use the results of scientific and technical activities (RSTA), using of which provides a balance of the parties interests. In these conditions the contractor takes the leading role of basic information carrier, identification and bringing to the state customers’ notice in form of alternative proposals.
Key words: affiliate model, joint ownership, solving of problems of vested rights to RSTA, competitive recovery and budget efficiency

INNOVATIVE INVESTMENT ACTIVITY

Titov L.Yu. — Multiplicative and synergetic effects of innovative networks

Abstract: The author of the article focuses attention on the influence of synergetic and multiplicative effects of innovative networks on economy under the impact of such factors as scientifically-technical progress, trade balance, commodity stocks, extent of monopolization of production, etc. In modern conditions the idea of the multiplicator and sinergizm has to be used in macroeconomic models in all directions of innovative activity.
Key words: synergetic effect, multiplicative effect, innovative networks, macroeconomical model

Yegorova O.S. — Environmental safety management under conditions of industrial enterprise innovative development in Russia

Abstract: Issues of managing environmental safety to ensure competitive and efficient activity of an industrial enterprise are considered. It is shown that innovative production needs managerial personnel capable of analysing, forecasting, making decisions, assuming the responsibility and taking into account different ecological aspects of the enterprise activity. Results of the environmental policy from the point of social responsibility of the industrial plant are analysed.
Key words: environmental safety, industrial enterprise, innovative development, social responsibility

MARKETING, SALES APPROACH

Golubeva S.S. — Information flows management of the mechanical engineering enterprise

Abstract: Wide application of principles of logistics and information and computer technologies in various branches is one of prominent features of modern economy. Special value it gets for the mechanical engineering enterprises where the powerful industrial potential is concentrated. Use of this potential in market conditions is complicated by bad adaptedness to fluctuations of factors macro- and microhabitats the timely and qualitative information about which is necessary for release of hi-tech, competitive production.
Key words: management, logistics, information stream, the machine-building enterprise, uniform information field, information-computer technologies, information system

Hodina A.I. — Mathematical modeling of demands flow for spare parts at road-building equipment repair

Abstract: Road-making machines failure kinds and what caused them are considered. It is noted that actual data is to be taken into account when using apparatus of queuing theory to solve problems of timely spares backing. Procedure of statistical data collection and processing is given. Least square method application for deriving a mathematical claim flow model for road-making machines spares is shown.
Key words: road building machinery, service parts, least square method

Bor V.N. — Integral index design procedure of a nonmaterial small-scale enterprise efficiency and stability evaluation

Abstract: Effectiveness and stability estimation procedure of a small-scale enterprise in the activity of Quality of Service under crisis conditions is developed.
Key words: management, enterprise, analysis, structure, metrics, monitoring

QUALITY PRODUCTION, COMPETITIVENESS

Vyacheslavova O.F., Savostyanova O.V., Ivanaysky V.A. — Information technologies in cars details fractal surfaces research and modeling

Abstract: Questions of information technologies application in fractal surfaces research with the automated control devices usage on the basis of the computer equipment that allows to receive sample surface images in the nanometer range three-dimensional and possibility of the detailed analysis of various characteristics of the cars details surface are considered.
Key words: information technologies, fractal surfaces, cluster, modeling, probe microscopes, particles

Zmiyevsky V.I. — Assessment of the quality management system of granular and powder metallurgy production

Abstract: An analysis of the present certification requirements of the quality management systems of granular and powder metallurgy production is given; suggestions on requirements fulfilment control by the certification bodies of the quality management systems as of exercising activities by them are offered.
Key words: granular and powder metallurgy, quality, conformance evaluation

EDUCATION, PROFESSIONAL TRAINING

Frolov V.A., Fedorov S.A. — Some aspects of technical universities activity in competence-based approach introduction in specialists training educational practice

Abstract: The article examines the main aspects implementing of competency approach in higher vocational education.
Key words: educational programs, countinuing education, competence, innovative educational technologies, third-generation Federal Educational Standard, competency approach

FOREIGN EXPERIENCE

Pushkareva M.B. — Organizations functioning in resource-constrained conditions (the review of foreign journals)

Issue 3/2013

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Usmanova T.H., Hayrullina L.I. — Actual problems of regional projects formation and financing

Abstract: Now there is a set of problems at formation of regional investment programs. Absence of professional shots, and also real possibility of attraction of off-budget means, for realization of regional programs have led to deterioration of their investment appeal. Therefore it is necessary to develop new techniques of financial modelling for effective advancement of regional programs.
Key words: regional projects, formation of new mechanisms of financing, financial modeling, strategy of development of region, the business plan, off-budget financing, state-private partnership

Kashirin V.V., Privivkova L.A. — Mechanism of the modern enterprise management

Abstract: This article contains a development review of modern enterprise management process. Taking into account the development of industry sector shows the complexity of competition for leadership and the need for innovative technologies in the enterprise management system. Described the complexity of implementing automated innovations and the consequences of wrong choices for integrated development of modern industrial enterprises in Russia. The problems encountered in the implementation of automated control systems. There are some criteria for selecting automation. When you select a plan for the development businesses need a clear understanding its future development. It is also necessary to take into account all the costs (financial, labor, time) spent on the introduction of automated control systems. It should be kept in mind that the positive effect is usually seen immediately, but after some time.
Key words: industry, innovative technology, structure, enterprise application suite, automated enterprise management system, integrated enterprise management system

Hayrullina A.D., Shaykhullina L.R. — Corporate governance and company cost

Abstract: This article analyzes the dependence of the company’s value on the quality of corporate governance. The authors provide a variety of investigations on the link between corporate governance and firm value. Correlation and regression analyses was made in order to prove hypothesis about direct connection between the level of corporate governance and the value of the company.
Key words: company, corporate governance, value, correlation and regression analysis

Burtsev V.V. — Analysis of the commercial organization business segments

Abstract: The commercial organization’s business segments concepts and the economic added value centers are considered in this paper. Relevance of the commercial organization and its business segments development recurrence perspective is proved. The concept of business segments life cycle is entered. The hypothesis of the commercial organization cost cycles (business cost cycles) and cycles is offered. Results of research of the commercial organization cost cycles allowed to define system of indicators of its activity for the purpose of development prospect forecasting.
Key words: business segments, commercial organization, corporate activity, capital

Agarkov A.P. Yerokhina E.A. — The organization of transport-warehouse production supplying at the enterprise

Abstract: Under consideration there is a problem of the system organization of transport and storage facilities supply of manufacture at a machine building enterprise. A logistic approach to the problem is suggested.
Key words: a block of functional modules, transport supply of manufacture, logistic approach

Lukashev Ye.A., Poserenin S.P., Oleynik A.V. — Construction concept of the maintenance and repair optimal policy by the methods of graph theory and quasi thermodynamic cycles

Abstract: It is shown how the graph theory and reliability theory determine schedule and volume of the maintenance and repair functions. Assigned task may be formalized, as well as adapted at the phase of product design, its manufacturing, service system organization, operation and further utilization.
Key words: maintenance, repair, graph theory, quasi thermodynamic cycle

INNOVATIVE INVESTMENT ACTIVITY

Obukhova I.A., Solovyeva I.P., Asayeva T.A. — Management of industrial production innovative activity due to the investment efficiency increasing

Abstract: For innovative-investment projects’ economic efficiency assessment accuracy increasing the calculation method of the discounting rate project realization including risk-free norm individualized on time intervals, an inflationary award, a risk award external and a internal environment risk award of the project is offered.
Key words: innovations, investments, efficiency, discounting rate

Nefedov V.A., Lazukina A.O. — Creation of new model of the clothing industry enterprises innovative activity

Abstract: This article describes the current state of innovation in the form of garment manufacturing coupled model, provides the features and conditions of developing the industry. The work propose a new integration model of innovation, where introduced notions of commercial agent — retailer and made integration with the environment in the form of consumer goods and raw materials suppliers.
Key words: innovation, innovation activity, garment manufacturing, textile industry, coupled model, integrated model, dealer, material support

Fedorov V.K., Bendersky G.P., Pozdnyakov K.K. — Features of production manpower resources innovative potential development

Abstract: Article gives a characteristics of workforce and examines principals and approaches to development of it’s innovation in modern conditions.
Key words: innovation potential, workforce (labour resources), innovative development, high tech, agronomical principals

MARKETING, SALES APPROACH

Chatshin V.V. — Personnel marketing as a factor of machine-building enterprise innovative activity efficiency increasing

Abstract: Leaning against methods of the economic theory, opens the theoretical bases and teleological essence of marketing of the personnel as special approach to management of the internal environment of firm. The author shows, how personnel marketing can effectively influence criterion functions and parameters of restrictions of economic life of the machine-building organization, including at realization of an innovative policy.
Key words: innovative policy, machine-building organization, marketing of the personnel

QUALITY PRODUCTION, COMPETITIVENESS

Bogdanov A.V., Odinokov S.A., Tchernyaev A.V. — Regression-sedate assessment of difficult technological process key quality parameters

Abstract: The problem of mathematical modeling application in technological processes quality management on the basis of numerical methods is considered. The method of a regression-sedate assessment of difficult technological process key quality parameters with allocation of significant parameters by the sedate representation analysis of numerical results values in the form of functional dependences on its input parameters is offered.
Key words: mathematical modeling, numerical methods, technological process, quality parameters

Zmiyevsky V.I. — Quality management systems (QMS) assessment of the tool supplying production

Abstract: The analysis of existing requirements to procedures of tool ensuring production QMS audit is provided and offers of their performance checking by expert groups and certification bodies of quality management systems in their carried out activity are given.
Key words: tool production, quality, compliance assessment

EDUCATION, PROFESSIONAL TRAINING

Kaganov V.S. — Classification of the corporate training relations

Abstract: In the article discloses criteria for the classification of corporate learning relations, describes the types of corporate learning in separate classifications, and presents list of forms of corporate learning.
Key words: classification criteria for corporate learning, business size, forms of corporate learning

FOREIGN EXPERIENCE

Pushkareva M.B. — Venture investment usage in machine industry (the review of foreign journals)

Issue 2/2013

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Badalova A.G., Eleneva Yu.Ya., Shebarov A.I. — Main problems of machine-building enterprises development management

Abstract: When managing a plant development involving a possibility of onset and expansion of crisis up to loss of business, in order to prevent crises or minimize their consequences it is necessary to handle risks of the plant. The latter is a binding constituent of the plant development management, and worked out toolkit (i.e. interdependence model of level of development, life-cycle stages, risks and crises with key plant state characteristics) allow management to make valid decisions on plant development management in accordance with risks or crises.
Key words: management, machine building plant, risks, crisis, model

Gorish A.V., Dunaevsky V.P., Kirillov A.B., Kotov A.N., Makarov Yu.N., Ponomarev S.A. — Problems of integrated production and technological complexes management

Abstract: By giving an example of manufacturing information-measuring equipment as complex high-technology science-consuming manufacturing the necessity of creating and developing the basics of integrated industrial-engineering complexes control are studied.
Key words: information-measuring equipment, integrated industrial-engineering complex, unified methodological approach, control system

Kovalev A.P., Iskhakov R.F. — Configuration choice features for industrial enterprise’s management information system

Abstract: In the following paper the computer information systems’ functionality which are offered in the market for the industrial enterprise management are analyzed. Classification of these enterprise management systems by the number of the indexes, helping to choose the most expedient system configuration taking into account enterprise features and corporate development strategy is offered.
Key words: industrial enterprise, management, information system, configuration

Erofeev M.M., Kotov V.V., Podshivalov A.A. — Computer modeling as means of production efficiency increasing

Abstract: The complex of advanced technologies in the field of computer modeling is considered. The software products which usage experience at the industrial enterprises testifies that in Russia there is a considerable expenses reduction potential in products design and production practically in all modern industry areas are presented. Mathematical modeling application allows to estimate the design more precisely and correctly, to consider the technology adequately, to pick up all demanded parameters optimally, to exclude unnecessary stocks almost completely, to reduce time for design and technology development, products mass, to raise term of their service.
Key words: computer modeling, industrial enterprise, technology, design, program complex

Krusser N.G. — Controlling efficiency assessment at the enterprise

Abstract: In the following paper is shown that the enterprise’s controlling system introduction allows to increase economic activity management process significantly efficiency.
Key words: controlling, management, expeditious control, monitoring, consulting

Bogatiryov V.D., Yurchenko K.A. — Four-element supplying and purchasing logistics optimization model of machine-building enterprise

Abstract: The economic mathematical model of supply logistics of industrial enterprise is presented. The model includes four elements — supply costs, transporting costs, storing costs and bank lending costs and takes into account the discrete nature of the production, storage and transportation of raw materials, so it is possible to optimize procurement by selecting the amount and timing of purchases from suppliers as well as reassigning between commodities and materials in stock.
Key words: economic mathematical models, industrial enterprise, supply, transporting, storing, bank lending

Alkhimovich I.N. — Small and large industrial enterprises’ interaction in economy transformation

Abstract: In this article expounded researches results of different small and large industrial enterprisers, communication forms and a wide experience of this communication. The authoress pays attention to the fact that small business can be supported by large enterprisers, which would be able to supply it resourses in interaction.
Key words: integration forms, interaction small and large industrial enterprisers, structure of production

Butko E.Ya., Gridchina A.V. — Small business as business activity form

Abstract: Article is devoted to one of forms of development of business of Russia — to small business. The characteristic, basic differences, country features are given. In work the first stage of development of small business of Post-Soviet Russia is allocated, its assessment and a role in further development of enterprise structures and forms of the state support is given.
Key words: small business, state support, investments, voucher, competitiveness, economic environment

INNOVATIVE INVESTMENT ACTIVITY

Fedorov V.K., Hansa A.N. — About essence and innovative potential of the second beginning of thermodynamics application in innovations theory methodology creation

Abstract: The article shows the possibility of interpretation and justified methodology of innovation theory based on the second law of thermodynamics, in particular through the application of the concept of entropy. It is shown that at the basis of the entropy can be explained by the processes of innovation. The notions of “entropy of innovation”, “principles of phenomenological innovation”, “innovative energy”.
Key words: the second law of thermodynamics, entropy principle, energy of innovation, the innovation process, the entropy of innovation, theory and methodology of innovations

Shtennikov V.N. — The adjacent rights in innovative economy context

Abstract: The author of article considers that with a view of development of innovative economy it is necessary to discuss expediency of expansion of the list of the rights, adjacent with author’s, having added with their rights, adjacent with patent.
Key words: intellectual property, the copyright, the adjacent rights, executions, soundtracks

MARKETING, SALES APPROACH

Kislukha A.E., Fedorov V.K., Sapegin V.I. — Principles of marketing strategy formation of radar identification systems development

Abstract: There is the method of formation of marketing strategies of systems development principles on the basis of SWOT-analysis for creation of marketing strategy offered in article. The key role of development of these methods for development of base radio-electronic stations designs is shown.
Key words: system of the state radar-tracking identification, the SWOT-analysis, strategy of system development, marketing strategy of development

QUALITY PRODUCTION, COMPETITIVENESS

Egorycheva E.V., Volkov A.S. — Commercialization risks assessment of intellectual property objects: problems and prospects

Abstract: An article reviews the specifics, problems and challenges of IP risks evaluation. Also the article reveals the system of IP risks classification and indicates the subject or IP risks evaluation by means of fuzzy set theory.
Key words: intellectual property, commercializing intellectual property, risks of IP commercialization

Zmiyevsky V.I. — Quality management systems’ assessment (QMS) of drawing coverings shops and areas

Abstract: The analysis of existing requirements to quality management systems certification procedures of shops and drawing coverings areas are provided. The offers of their performance checking by quality management systems bodies in carried out activity are given.
Key words: drawing coverings, quality, compliance assessment

Korneyeva V.M., Negrimovskaya N.P., Feofanov A.N. — Experts’ optimum number calculation revealed data volume of preliminary inquiry results

Abstract: Getting to the development of methods of evaluating the quality of an object, first perform a survey of experts aimed at identifying the maximum number of data, using a technique which will be built, that is, the “generation” of the original data set. Under the Data (or “propositions”) understand that the set of homogeneous data, which should provide the expert as a result of the survey according to the purpose of examination. These may include: performance characteristics that make the quality evaluation of the object, the external factors affecting the quality, the possible solutions for facility assessment and proposals to improve the quality, etc.
Key words: qualimetry, expert, quality, performance characteristics

FOREIGN EXPERIENCE

Pushkareva M.B. — Peculiarities of manufacturing production systems’ formation (the review of foreign journals)

Issue 1/2013

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Skhirtladze A.G., Timiryazev V.A., Feofanov A.N. — Manufacture products’ adaptability analysis of machine-building productions

Abstract: The problems of ensuring manufacturability of designs of technical products in the ground and repair the machine-building production, improve their performance and quality of production, raising the technical level of production through the introduction of a number of measures of technical, organizational and economic nature.
Key words: technical product, technology, technical data, parameter, standardization, technological preparation of production

Aliyev A.B. — Research of the economic safety problem of industry and scientifictechnical sphere

Abstract: The factors influencing economic safety of industries are investigated: crisis situations in manufacturing are estimated. Features of industry steady financial position owing to the economic safety ensuring, promoting effective use of a national resource are considered.
Key words: economic safety, industry, financial and economic activity

Volkova L.A. — Theoretical aspects of risks profile formation of the motor transportation enterprise

Abstract: Risk management represents the future prediction attempts. Risk management is anyway reduced to various events influence extent understanding of the enterprise future. Development is necessary for professional and systematic risk management of “risks profile” business, project, etc. to define risks most fully and, respectively, to provide all actions necessary for providing profit and security. Development of a risks profile will allow administration to consider all nuances, to see all the picture entirely. Classification of risks is considered, many of which are inherent in the motor transportation enterprise and enter into a risks profile.
Key words: risk management, business, classification of risks, enterprise

Mistakhov R.I. — Efficiency increasing of the enterprise’s productions organization

Abstract: The analysis of the value creation current stream card of the oil and gas equipment shop’s production line in the conditions of the WTO accession is carried out. Production losses are revealed, defined their specific weight in the general stream, recommendations about production losses reduction are offered.
Key words: mechanical engineering, productions, economical production, value creation current stream card, production losses

Barabash J.A., Molchansky A.V. — Technique of the operational management production structure systems choice

Abstract: The production (plant, shop) automation specialized systems’ ways of a choice are investigated. The technique of the software automated choice for shop management is offered. The stated technique efficiency is estimated and risks of its wrong usage at a software choice are calculated.
Key words: operational management, software, specialized systems, risks

INNOVATIVE INVESTMENT ACTIVITY

Fedorov V.K., Kislukha A.E. — Innovative management structure and functions of the top management at the defense industry complex enterprises

Abstract: The organizational and technical problem of advance of innovative ideas at the industry and defense industry complex enterprises is considered. Need of the chief manager (director) for innovations is proved. Expediency model application open innovations is opened.
Key words: chief manager (director) for innovations, innovative development, kraudsorsing, open innovations

Agaev F.G., Guliev F.F. — Questions of the economically effective satellite monitoring organization of forest conditions

Abstract: The possibility of carrying out of pair wise operation of two different type spectroradiometers the which is optimized using linear programming method. The example of optimization of joint operation of spectroradiometers LANDSAT and SPOT taking into account the limitations imposed on some general parameters of remote sensing is giver.
Key words: optimization, linear programming, parameters, remote sensing

Shtennikov V.N. — Brain workers motivation in innovative economy interests

Abstract: According to the articles author, known project elibrary can be used to motivate knowledge workers, similar to measures taken in the field of show business. In spite of the fact that introduction of additional point 2 of article 1273 of the Civil Code of the Russian Federation is focused only on encouragement of workers from art and show business sphere, it can be used in interests of scientific community, innovative economy.
Key words: innovative economy, intellectual property, the copyright, scientific products, compensation

MARKETING, SALES APPROACH

Volovikov B.P. — Marketing stability management of the industrial enterprise

Abstract: Approaches to industrial enterprise marketing stability research are considered. The presented algorithms of marketing stability indicators assessment allow to choose enterprise behavior portfolio strategy in the chosen target segment. Results of the projects’ stability analysis throughout give the possibility to create of the enterprise projects’ portfolio structure and to choose the optimum portfolio management programme, providing maximum possible stability, stock in market conditions.
Key words: marketing stability, enterprise stability indicators, management algorithms, enterprise portfolio projects management

QUALITY PRODUCTION, COMPETITIVENESS

Tikhonov A.I., Muzhdabayeva N.V. — Production logistic support improvement in mechanical engineering

Abstract: In the article the data on the Russian transport planes being in operation and produced at factories of the aviation industry of Russia are resulted. Necessity of the logistical approach to production management, by deliveries and use of completing products for transport planes is proved. Ways of the decision of separate logistical problems are offered.
Key words: Russian transport planes, the logistical approach to the management, completing products for cargo planes, authenticity, criteria of efficiency of logistical management

Babets D.A., Rudzey G.F. — Quality management system improvement at JSC Zeldorremmash repair enterprises

Abstract: The paper is devoted to the corporate integration quality management system creation based on the business processes organization and improvement on JSC Russian Railways. This system will allow to liquidate existing problems and bottlenecks, will increase growth of assets profitability and organization’s personnel capacity development.
Key words: quality management system, business processes improvement, assets profitability, bottlenecks, personnel capacity

Artemyev E.V., Lukyanchik V.V. — Methods and approaches improvement of technological processes quality management of space-rocket equipment difficult products manufacturing

Abstract: The characteristic of the current state and problems of technological processes quality management of space-rocket equipment difficult products manufacturing is given. The most important operated parameters or technological process considerably predetermining quality of finished goods are created. The order of acceptance and implementation of the administrative decision concerning technological process quality is formulated and the main stages (elements) of its continuous improvement process are given.
Key words: quality management, technological processes, management, statistical control

Shulgin D.B., Chaykov M.Yu., Chaykova A.M., Shulgina N.A. — Management rationalization activity organization at the modern instrument-making enterprise

Abstract: Rationalization activity management practice at an enterprise in the Urals is considered. Motivational factors of the rationalization activity are brought out and systematized. Measures and local statutory acts aimed at stimulation of creative activity of the plant workers are discussed.
Key words: management, rationalization activity, measure, creative activity

FOREIGN EXPERIENCE

Pushkareva M.B. — The innovative entrepreneurship usage for organization’s efficiency increasing (the review of foreign journals)

Issue 6/2012

OPERATION OF BUSINESS, INDUSTRIAL ENGINEERING

Vinogradova E.E., Barakhov V.I., Kuznetsov V.P. — Research of corporations’ economic activity parameters in the crisis management conditions

Abstract: In the present work submitted are the research results of economical activity parameters changes of corporation business units created on the basis of the defence enterprise and criteria for making decisions during crisis-proof management of commodity-money flows. The research is performed using the algorithm model described in the first article. Analyzed is one of possible approaches to corporation crisis-proof management, based on optimization of affiliated companies overhead charges redistribution between market and business units.
Key words: corporation business, business unit, crisis-proof management

Krasnopevtseva I.V. — Current state of labor productivity material base of the Russian industrial enterprises

Abstract: The research results of the dynamic analysis of a working efficiency level in manufacturing industry of Russian Federation and economic activity in the field of machine building and metal-working are given. The necessity of production development by the innovation way connected with enterprise modernization in order to increase a working efficiency level in industry is emphasized. The state of the fixed capital of industrial enterprises, the tendencies of investments into machinery and equipment are considered. The low rates of the renewal of fixed capital are noted in machine building itself.
Key words: working efficiency, machine building, metal-working, fixed capital, investments

Shestakova E.V. — The taxation and economy in the industry

Abstract: The industrial economy in mainly depends on the taxation. High rates of taxes are capable to force the companies looking for the ways of tax burden reduction, leaving from taxes, offshore zones searching. The preferential modes accepted for example at export of oil, are capable to support certain branches of economy, at the same time, these measures of support of one branches allow to speak about priority and not priority branches of economy. In this paper the authors try to consider aspects of the taxation, and also possibility of tax planning for the companies.
Key words: industrial economy, taxation, branches of economy, tax planning

Skhirtladze A.G., Feofanov A.N. — Economic efficiency of processing equipment’s complete overhaul and modernization

Abstract: The questions assess the economic efficiency costs of compensation for moral and physical wear of processing equipment. Methods of determining the economic efficiency of repair of equipment by comparison with the efficiency of introduction of new technology, instead of the obsolete.
Key words: economic efficiency, technological equipment, physical deterioration, obsolescence, major repairs, new equipment, maintenance, cost, modernization

INNOVATIVE INVESTMENT ACTIVITY

Tochilin O.V. — The WTO in the international is innovative-investment system: organizational, economic and legal aspects

Abstract: The author considers the basic rules and principles of the WTO working, and also various aspects of activity of this organization in the international innovative and investment system.
Key words: innovative-investment system, WTO, goods, services, principles

Vasilyev S.A., Volkov V.A. — Investments and innovations: synergetic part

Abstract: The authors of the article investigate foundations of strategic planning and management of investment activities as well as consider approaches for rise in the economical productive efficiency, i.e. approaches for resulting synergy effect from the imposition of factors.
Key words: innovation, investment, synergism

MARKETING, SALES APPROACH

Chursin A.A., Okatyev N.A. — Mathematical model of the price formalization and updating for the space-rocket industry production

Abstract: Ideas of pricing on the knowledge-intensive production are stated. Authors consider an investments optimization problem at the set industrial index on initial and final periods. As such indicator product cost is considered. For the solution of a task the mathematical model is constructed.
Key words: space-rocket industry, pricing, mathematical model, product cost

QUALITY PRODUCTION, COMPETITIVENESS

Kirillov A.B., Kotov A.N. — Strategic management in corporate structures

Abstract: The problems of building the adaptation mechanism of conversion to the innovative way of development inside a corporate structure providing strategic and competitive advantages at the national and world market are studied.
Key words: innovation activity, science linkage of a sector, corporate structure, innovation potential, adaptation mechanism, Innovation Development Center

Reshetov V.V. — Organizational structure of competitive production

Abstract: Construction of a target composition of the organizational structure including the basic organizational positions and priorities of competitive manufacture in conditions productions spends to necessity of search and formation of adaptable organizational structures in view of innovative potential. The organizational structure of competitive manufacture should be constructed proceeding from key conditions of efficiency – the innovations, a filled up opportunity of investments, purposefulness and the adaptation to new conditions of an economic climate.
Key words: principles, value, system, purposefulness, organizational positions, organizational priorities, organizational culture, organizational beginning, life cycle, processes, composition

Zmiyevsky V.I. — Assessment of quality management systems (QMS) of forge-pressure and forming productions

Abstract: The analysis of existing requirements is provided to procedures of quality management systems certification of forge-pressure and forming productions and offers on check of their performance by quality management systems certification bodies in their activity are given.
Key words: forge, pressure and forming processes, quality, compliance assessment

EDUCATION, PROFESSIONAL TRAINING

Iosifov P.A., Pervanyuk A.S., Verger A.E. — Integration of educational and training complexes into information structure of the enterprise as means technical experts’ preparation and retraining processes efficiency increasing

Abstract: Integration of technicians’ training and retraining systems into the informational structure of an enterprise, main tasks of the integration process and its solution means, integration key fields regarding usage of standard data warehouse, as well as educational methodological approaches governing efficient application of the obtained by personnel knowledge at real-life operation after the training are considered.
Key words: training facilities, education, training, retraining, integration, integrated information space

FOREIGN EXPERIENCE

Pushkareva M.B. — Prospects of flexible production systems usage (the review of foreign journals)